Steering Gearbox Installation

Special Tools Required -Subframe Adapter VSB02C000016* -Subframe Alignment Pin 070AG-SJAA10S -Engine Support Hanger, A and Reds AAR-T1256* -Engine Hanger Adapter VSB02C000015* *: Available throug ...

Front and Rear Suspension

...

See also:

Trunk Light Test/Replacement
1. Open the trunk lid. 2. Carefully pry out the trunk light (A). Trunk Light: 5 W 3. Disconnect the 2P connector (B) from the trunk light. 4. Check for continuity between terminals No. 1 ( + ...

Brake Pedal Position Switch Test
1. Disconnect the 4P connector (A) from the brake pedal position switch (B). 2. Check for continuity between terminals No. 1 and No. 2. • There should be continuity when the brake pedal ...

Mainshaft Inspection
1. Inspect the gear and bearing contact areas for wear and damage, then measure the mainshaft at points A, B, C, D, and E. If any part of the mainshaft is less than the service limit, replace it. ...