Honda Accord: Supplemental restraint system (SRS) - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Supplemental restraint system (SRS)

The Accord SRS Includes a driver's airbag in the steering wheel hub, a passenger's airbag In the dashboard above the glove box, seat belt tensioners in the front seat belt retractors, side curtain airbags in the sides of the roof, and side airbags in the front seat-backs. Information necessary to safely service the SRS is included in this Service Manual. Items marked with an asterisk (*) on the contents page include or are located near SRS components. Servicing, disassembling, or replacing these items requires special precautions and tools, and should be done by an authorized Honda dealer.

-To avoid rendering the SRS inoperative, which could lead to personal injury or death in the event of a severe frontal or side collision, all SRS service work should be done by an authorized Honda dealer.

- Improper service procedures, including incorrect removal and installation of the SRS, could lead to personal injury caused by unintentional deployment of the airbags, side airbags, and/or side curtain airbags.

- Do not bump or impact the SRS unit, front impact sensors, side impact sensors, or rear safing sensor, especially when the ignition switch is in ON (II), or for at least 3 minutes after the ignition switch is turned to LOCK (0); otherwise, the system may fail in a collision, or the airbags may deploy.

- SRS electrical connectors are identified by yellow color coding. Related components are located in the steering column, center console, dashboard, dashboard lower cover, in the dashboard above the glove box, in the front seats, in the roof side, and around the floor. Do not use electrical test equipment on these circuits.

    Safety Messages
    Your safety, and the safety of others, is very important. To help you make informed decisions, we have provided safety messages, and other safety information throughout this manual. Of course, it ...

    General Information
    ...

    See also:

    Bulb Replacement
    Headlight (High'Beam) 1. Disconnect the 2P connector (A) from the headlight Headlight (High Beam): 60 W 2. Turn the bulb socket 45 В° counterclockwise to remove the bulb. 3. Install a new b ...

    DTC Troubleshooting Index
    NOTE: Record all DTCs, and sort them by DTC type using the DTC troubleshooting index, then troubleshoot the DTC(s) in this order: • Battery voltage DTCs • Internal error DTCs • Lo ...

    Playing a CD
    Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3, WMA, or AAC*1 format. With the CD loaded, select the CD mode. • How to Select a File from the Music Search List (MP3/WMA/ ...