Honda Accord: Sunglasses Holder
To open the sunglasses holder, push then release the indent. It will unlatch and swing down. To close it, push it until it latches. Make sure the holder is closed while you are driving.
Some larger styles of sunglasses may not fit in the holder.
You may also store small items in this holder. Make sure they are small enough to let the holder close and latch, and that they are not heavy enough to cause the holder to pop open while driving.
Vanity Mirror
To use the vanity mirror on the back
of the sun visor, pull up the cover.
The vanity mirror lights come on
when you pull up the cover. ...
Coat Hook
To use a coat hook, pull it down.
Close it with a firm push.
Make sure the coat hook is closed
when you are not using it. This hook
is not designed for large or heavy
items. ...
See also:
Housing and Shaft Assembly Removal
Special Tools Required
Housing Puller 07HAC-PK40102
1. Remove the ATF feed pipe (A) from the idler gear shaft, and remove the ATF
lubrication pipe (B) from the
transmission housing.
2. Remove ...
Countershaft Assembly Clearance Inspection
tightened to the specified torque (see page 13-46).
1. Measure the clearance between 1st gear (A) and the
1st gear distance collar (B) with a feeler gauge (C).
- If the clearance exceeds the se ...
Navigation Display Unit
Removal/Installation
1 Remove the audio unit (see page 23-114), then
remove the center display visor (see page 20-171).
2. Remove the screws and bolts (A), then pull out the
navigation display unit (B).
3. Install ...