Automatic Transmission and A/T Differential (cont'd)

Suspension

See also:

Cf Hinder Bore Honing
Only a scored or scratched cylinder bore must be honed. 1. Measure the cylinder bores (see page 7-17). If the engine block is to be reused, hone the cylinders, and remeasure the bores. 2. Re ...

Setting the Clock
On models without navigation system To set the time, press the CLOCK button until you hear a beep. The displayed time begins to blink. Change the hours by pressing the H (hour) button until th ...

Fog Light Bulbs*
When replacing, use the following bulbs. 1. Loosen the screw using a Phillips-head screwdriver.  - Be careful not to rotate the screwdriver more than one or two times to the left. ...