Honda Accord: Standards and Service Limits
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Specifications / Standards and Service Limits
- Engine Electrical
- Engine Assembly
- Cylinder Head
- Engine Block
- Engine Lubrication
- Cooling System
- Fuel and Emissions
- Clutch
- Clutch (cont'd)
- Manual Transmission and M/T Differential
- Manual Transmission and M/T Differential (cont'd)
- Automatic Transmission and A/T Differential
- Automatic Transmission and A/T Differential: (cont'd)
- Automatic Transmission and A/T Differential (cont'd)
- Automatic Transmission and A/T Differential (cont'd)
- Steering
- Suspension
- Brakes
- Air Conditioning
Specifications
...
See also:
Tensioner Pulley
Replacement
1. Remove the auto-tensioner (see page 4-31).
2. Clamp the auto-tensioner (A) by using two 8 mm bolts
(B) and a vise (C) as shown. Do not clamp the
auto-tensioner itself, then remove the tensione ...
Hood Seal and Hood Molding
Replacement
NOTE: Take care not to scratch the hood.
1. Detach the clips (A) with a clip remover, then remove
the hood seal (B). On Canada models: Detach the clips
(C), then remove the hood molding (D).
2-d ...
Windshield Washers
Check the level in the windshield
washer reservoir at least monthly
during normal use.
Check the fluid level by removing
the cap and looking at the level
gauge.
On Canadian models: The low ...