Honda Accord: Shift Lever Position Indicators
These indicators on the instrument panel show which position the shift lever is in.
Using a paddle shift mode, the gear position indicator shows you the selected gear number.
The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.
If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible.
Shifting
To shift from Park to any position,
press firmly on the brake pedal, and
press the release button on the front
of the shift lever, then move the
lever. You cannot shift out of Park
when th ...
See also:
Crankshaft Main Bearing Replacement
Main Bearing Clearance Inspection
1. To check the main bearing-to-journal oil clearance,
remove the lower block and the bearing halves (see
page 7-14).
2. Clean each main journal and the bearing ...
If the Engine Overheats
The pointer of your vehicle’s
temperature gauge should stay in
the midrange under most conditions.
If it climbs to the red mark, you
should determine the reason (hot
day, driving up a steep ...
Key Interlock System Circuit
Troubleshooting
Produced in USA models
NOTE: SRS components are located in the area. Review
the SRS component locations 4-door {see page 24-21),
2-door (see page 24-23), and precautions and
procedures (see page 2 ...