Honda Accord: Shift Lever Does Not Move - Handling the Unexpected - Honda Accord 2013-2022 Owner's ManualHonda Accord: Shift Lever Does Not Move

Follow the procedure below if you cannot move the shift lever out of the

Follow the procedure below if you cannot move the shift lever out of the position. position.

• Releasing the Lock

1. Set the parking brake.

1. Set the parking brake.

2. Remove the key from the ignition switch.

2. Remove the key from the ignition switch.

2. Remove the built-in key from the smart

2. Remove the built-in key from the smart entry remote.

3. Wrap a cloth around the tip of a small flattip

3. Wrap a cloth around the tip of a small flattip screwdriver. Put it into the shift lock release slot as shown in the image, and remove the cover.
4. Insert the key into the shift lock release slot.
5. While pushing the key down, press the shift lever release button and place the shift lever into (N.
 - The lock is now released. Have the shift lever checked by a dealer as soon as possible.

    Jump Starting
    • Jump Starting Procedure Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's bat ...

    Overheating
    How to Handle Overheating Overheating symptoms are as follows: • The temperature gauge needle is at the mark or the engine suddenly loses power. • Steam or spray comes out of the engine co ...

    See also:

    Main Valve Body Disassembly, Inspection, and Reassembly
    1. Clean all parts thoroughly in solvent, and dry them with compressed air. Blow out all passages. 2. Do not use a magnet to remove the check balls, it may magnetize the balls. 3. Inspect the ...

    Glove Box
    Open the glove box by pulling the handle to the left. Close it with a firm push. Lock or unlock the glove box with the master key. An open glove box can cause serious injury to your passe ...

    Dashboard/Steering Hanger Beam Disassembly/Reassembly
    Special Tools Required KTC Trim Tool Set SOJATP2014* *Available through the Honda Tool and Equipment Program; call 888-424-6857 NOTE: - Put on gloves to protect your hands. В© Take care no ...