Honda Accord: Rocker Arm Oil Pressure Switch A Removal/Installation - VTEC/VTC - Fuel and Emissions - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Rocker Arm Oil Pressure Switch A Removal/Installation

PZEV model

1. Remove the rocker arm oil control valve (see page 11-275).

2. Remove rocker arm oil pressure switch A.

3. Install the parts in the reverse order of removal with a


3. Install the parts in the reverse order of removal with a new O-ring (B).

    Rocker Arm Oil Pressure Switch Removal/Installation
    All models except PZEV 1. Disconnect the rocker arm oil pressure switch connector (A). 2. Remove the rocker arm oil pressure switch (B). 3. Install the parts in the reverse order of removal wi ...

    Rocker Arm Oil Pressure Switch B Removal/Installation
    PZEV model 1. Remove the rocker arm oil control valve (see page 11-275). 2. Remove rocker arm oil pressure switch B. 3. Install the parts in the reverse order of removal with a new O-ring (A) ...

    See also:

    Component Location Index
    ...

    Paint Code
    ...

    CKP Sensor Replacement
    1. Raise the vehicle on a lift. NOTE: Make sure the vehicle is level, because engine oil will drip out when you remove the sensor. 2. Remove the CKP sensor cover (A). 3. Disconnect the CKP s ...