Honda Accord: Rear Power Window Switch
Test/Replacement
1. Carefully remove the rear power window switch (A).
2. Disconnect the 14P connector (B) from the rear power window switch.
3. Remove the three screws and the rear power window switch (A).
4. Swap the rear power window switch with another known-good rear power window switch and test. If the original power window switch is faulty; replace it.
5. Install the switch in the reverse order of removal.
Front Passenger's Power Window
Switch Replacement
4-door
1. Carefully remove the front passenger's power
window switch (A).
2. Disconnect the 37P connector (B) from the front
passenger's power window switch.
3. Remove the four screws and th ...
Wipers/Washers
...
See also:
Your Vehicle at a Glance
Your Vehicle at a Glance
Your Vehicle at a Glance ...
Engine Installation
Special Tools Required
- Universal Lifting Eyelet 07AAK-SNAA120
Engine Hanger Adapter VSB02C000015
Engine Support Hanger, A and Reds AAR-T-1256*
Subframe Adapter VSB02C000016
Subframe Alignment P ...
Motor Test
1. Remove the front seat back panel, and seat-back
cover/pad.
• 4-door (see page 20-221)
• 2-door (see page 20-213)
2. Disconnect the 2P connector (A) from the lumbar
support motor (B ...