Honda Accord: Rear Air Outlet Replacement
NOTE: Take care not to scratch the body.
1_ Remove the rear bumper (see page 20-260).
2. Release the hooks (A), then remove the rear air outlet (B).
3. Install the air outlet by pushing on the hook areas until the hooks snap into place.
Rear Inner Fender Replacement
NOTE: Take care not to scratch the rear bumper or the body. 1. Remove the screws, then remove the rear inner fender (A) from the rear bumper (B) and the body. 2. Install the inner fender in th ...Openers
...See also:
B-CAN System Diagnosis Test Mode
1 and Test Mode 2 (without the
HDS)
Special Tools Required
MFCS (MCIC) Service Connector 07WAZ-00101 OA
Test Mode 1
Check the ECM/PCM for DTCs and troubleshoot
ECM/PCM (see p a g e 11-3) or F-CAN loss o f
communication errors first ...
Crankshaft Main Bearing Replacement
Main Bearing Clearance Inspection
1. To check the main bearing-to-journal oil clearance,
remove the lower block and the bearing halves (see
page 7-14).
2. Clean each main journal and the bearing ...
Paint Code
...