Additional Safety Precautions

Never hold an infant or child on your lap. If you are not wearing a seat belt in a crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wea ...

Protecting Infants

Child Seat Type An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat, and the child is ...

See also:

Shift Lock Stop/Shift Lock Stop Cushion Replacement
Type A Shift Lever 1. Remove the shift lock solenoid (see page 14-254). 2. Remove the shift lock stop (A) and the stop cushion (B) as a set. 3. Apply silicone grease to the pin (C) of the shif ...

Stall Speed Test
1. Wake sure the transmission fluid is filled to the proper level (see page 14-191). 2. Apply the parking brake, and block all four wheels. 3. Connect the HDS to the DLC (A) located under the ...

Hood Seal and Hood Molding Replacement
NOTE: Take care not to scratch the hood. 1. Detach the clips (A) with a clip remover, then remove the hood seal (B). On Canada models: Detach the clips (C), then remove the hood molding (D). 2-d ...