Honda Accord: Power Door Mirrors - Adjusting the Mirrors - Controls - Honda Accord 2013-2024 Owner's ManualHonda Accord: Power Door Mirrors

You can adjust the door mirrors when the

You can adjust the door mirrors when the ignition switch is in ON • Mirror position adjustment.

• Mirror position adjustment

L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position.

Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.

• Expanded View Driver's Mirror

The driver side door mirror has outer and inner

The driver side door mirror has outer and inner segments.

The outer segment is slightly curved to provide a wider angle view than a standard flat mirror.

This wider view may help you check areas that are not visible using a standard door mirror.

Objects visible in the outer segment of the driver side door mirror appear smaller than objects in the rest of the mirror. But in fact, they are closer than they appear.

Do not rely on your mirrors. Always look to the side and behind your vehicle before changing lanes.

    Interior Rearview Mirror
    Adjust the angle of the rearview mirror when you are sitting in the correct driving position. • Rearview Mirror with Day and Night Positions* Flip the tab to switch the position. The nigh ...

    Adjusting the Seats
    ...

    See also:

    Fuel Fill Door Adjustment
    1. Slightly loosen the hinge mounting bolts (A). 2 . Adjust the fuel fill door (B) in or out until it is flush with the body, and up or down as necessary to equalize the gaps. 3. Tighten the h ...

    Oil Check
    We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oil ...

    Power Mirror Switch Test/Replacement
    1. Remove the power window master switch. • 4-door (see page 22-305) • 2-door (see page 22-306) 2. Disconnect the 13P connector from the power mirror switch (A). 3. Check for contin ...