Under-floorTWC Removal/Installation

1. Raise the vehicle on a lift. 2. Remove the exhaust pipe hangers (A). 3. Remove the under-floor TWC (B). 4. Install the parts in the reverse order of removal with new gaskets (C) and new s ...

Component Location Index

...

See also:

ECT Sensor 1 Replacement
1. Drain the engine coolant (see page 10-6). 2. Disconnect the ECT sensor 1 connector (A). 3. Remove ECT sensor 1 (B). 4. Install the parts in the reverse order of removal with a new O-ring ...

Balancer Shaft Inspection
1. Seat the balancer shaft by pushing it away from the oil pump sprocket end of the oil pump. 2. Zero the dial indicator against the end of the balancer shaft, then push the balancer shaft back a ...

Instrument Visor Removal/Installation
Special Tools Required KTC Trim Too! Set SOJATP2014* *Available through the Honda Tool a n d Equipment Program; call 888-424-6857 NOTE: - Take care not to scratch the dashboard or the related pa ...