Honda Accord: Ninth generation (2013–2025)
For the ninth-generation Accord, Honda appointed Shoji Matsui, who served as an engineer on the Accord platform from 1985 to 1996 as lead project manager. It is the first Accord to use a strut suspension since the second generation, and the first Honda vehicle to be completely developed under the administration of Honda CEO Takanobu Ito. Honda revealed the Accord Coupe Concept at the 2012 North American International Auto Show in Detroit.
Eighth generation (2008–2012)
The North American version of the Accord has a different body from its Japanese counterpart. This shape is sold as the Honda Inspire in Japan, and is not sold in Europe. It was discontinued in Japan i ...
See also:
Evaporator Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs
(see page 2 1 - 9).
1. Remove the evaporator temperature sensor (see
page 21-67).
2. Dip the sensor in ice water, and measure the
resistan ...
License Plate Light Replacement
4-door
1. Poll the license plate light assembly out, and
disconnect the 2P connector (A) from the license plate
light.
License Plate Light: 5W
2. Separate the lens (B) and housing (C), then rem ...
Fuel Fill Pipe Removal/Installation
1. Drain the fuel tank (see page 11-309).
2. Remove the fuel fill cap.
3. Remove the left rear wheel.
4. Remove the fuel fill pipe cover (A).
5. Disconnect the quick-connect fittings (A) ( ...