Honda Accord: Multi-Information Display Warning andInformation Messages
The following messages appear only on the multi-information display. Press
the 
(information) button to see the
message again
with the system message indicator on.
Information Display Warning andInformation Messages
The following messages appear only on the information display.
...
See also:
Front Accessory Power Socket
Test/Replacement
NOTE: If all of the front and console accessory power
sockets do not work, check the No. 18 (7.5: A> fuse in the
driver's under-dash fuse/relay box and ground (G503)
first.
1. Remove the cent ...
Battery Removal and Installation
NOTE: The battery terminal disconnection and
reconnection procedure (see page 22-91) must be done
before and after doing this procedure- Some systems
store data in memory that is lost when the batt ...
CMP Sensor B Replacement
1. Disconnect the connector (A) and hoses (B) from the
EVAP canister purge valve (C), then remove the EVAP
canister purge valve assembly.
2. Disconnect the CMP sensor B connector (A).
3. Remov ...