Honda Accord: Maintenance Under the Hood
- Maintenance Items Under the Hood
- Opening the Hood
- Recommended Engine Oil
- Oil Check
- Adding Engine Oil
- Changing the Engine Oil and Oil Filter
- Engine Coolant
- Transmission Fluid
- Brake/Clutch Fluid
- Refilling Window Washer Fluid
To Use Maintenance MinderTM
• Displaying the Engine Oil Life
1. Set the power mode to ON.
2. Press the (Information) button
repeatedly until the engine oil life appears
on the multi-information display.
Based on the ...
See also:
A/T Clutch Pressure Control Solenoid
Valve B and C Test
1. Connect the HDS to the DLC (A) located under the
driver's side of the dashboard.
2. Turn the ignition switch to ON (II). Make sure the HDS
communicates with the PCM. If it does not, go to the
...
Drive Plate Removal and Installation
1. Remove the transmission assembly (see page
14-194).
2. Remove the drive plate (A) and the washer (B) from
the engine.
3. Install the drive plate and the washer on the engine,
and tighten t ...
Storing a Driving Position in Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
...