Engine Oil Life Display

To see the current engine oil life, turn the ignition switch to the ON (II) position, then press and release the select/reset knob repeatedly until the engine oil life indicator appears. ...

Resetting the Engine Oil Life Display

Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the information display the next time you turn the ignition sw ...

See also:

Crankshaft Main Bearing Replacement
Main Bearing Clearance Inspection 1. To check the main bearing-to-journal oil clearance, remove the lower block and the bearing halves (see page 7-14). 2. Clean each main journal and the bearing ...

Wheel Bearing End Play Inspection
1. Raise and support the vehicle (see page 1-13). 2. Remove the wheels. 3 . Install suitable flat washers (A) and the wheel nuts. Tighten the nuts to the specified torque to hold the brake d ...

Trunk Lower Trim Replacement
4-door NOTE: - Put on gloves to protect your hands. - Take care not to scratch the trunk lid. 1. Remove the license plate from the trunk lid. 2. Remove the clips fastening the trunk lower t ...