Hazard Warning Switch Test/Replacement

1. Remove these items: • Center vent for w i t h navigation system (see page 20-178) • Audio unit for without navigation system (see page 23-115) 2. Remove the hazard warning switch (A) ...

Component Location Index

4-door 2-door ...

See also:

Synchro Sleeve and Hub Inspection and Reassembly
1. Inspect the gear teeth on all synchro hubs and synchro sleeves for wear (rounded off corners). 2. Install each synchro hub (A) in its mating synchro sleeve (B), and check for free movement. Ma ...

Glass Weatherstrip Replacement
1 . Remove the moonroof glass (see page 20-91). 2. Place a piece of masking tape (A) on the middle of the front edge of the moonroof glass (B). Make sure that the tape is on the glass only, and i ...

Secondary Shaft Idler Gear Removal and Installation
Special Tools Required Attachment 42 mm I.D. 07QAD-P0A0100 Removal Place a spacer (A) on the secondary shaft (B), and set a puller (C) under the idler gear (D), then remove the idler gear. Ins ...