Honda Accord: Interior Light Switch
Test/Replacement
With moonroof
NOTE: The Interior light switch is built into the moonroof switch, and it switches the front individual map light OFF and DOOR positions.
1. Remove the front individual map lights (see page 22-258).
2. Disconnect the moonroof switch 12P connector (A) and the map light 3P connector (B).
3. Remove the moonroof switch (C) from the map light housing.
4. At the moonroof switch 12P connector, check for continuity between terminals No. 9 and No. 7.
• There should be continuity when the interior light switch is in the DOOR position.
• There should be no continuity when the interior light switch is in the OFF position.
5. If the continuity is not as specified, replace the moonroof switch assembly.
6. Install the parts in the reverse order of removal.
Trunk Light Test/Replacement
1. Open the trunk lid.
2. Carefully pry out the trunk light (A).
Trunk Light: 5 W
3. Disconnect the 2P connector (B) from the trunk light.
4. Check for continuity between terminals No. 1 ( + ...
Ambient Light Replacement
With moonroof
NOTE: The ambient light is built into the moonroof
switch.
1. Remove the front individual map lights (see page
22-258).
2. Disconnect the moonroof switch 12P connector (A)
and ...
See also:
Driving Position Memory System
U.S. V6 models, and Canadian EX-L and
V6 models with navigation system
Your vehicle has a memory feature
for the driver’s seat position.
Seat, except for power lumbar,
position can be stored ...
Wheel Runout Inspection
1. Raise and support the vehicle (see page 1 -13).
2. Check for a bent or deformed wheel.
3. Set up the dial gauge as shown, and measure the
axial runout by turning the wheel.
Front and rear w ...
Compact Spare Tire
Use the compact spare tire as a
temporary replacement only. Get
your regular tire repaired or replaced,
and put it back on your vehicle as
soon as you can.
Check the air pressure of the
com ...