Honda Accord: Interior Care
Leather
EX-L and all V6 models
Vacuum dirt and dust from the leather frequently. Pay close attention to the pleats and seams.
Clean the leather with a soft cloth dampened with a 90% water and 10% neutral wool detergent solution.
Then buff it with a clean, dry cloth.
Remove any dust or dirt on leather surfaces immediately.
Vehicle Storage
If you need to park your vehicle for
an extended period (more than 1
month), there are several things you
should do to prepare it for storage.
Proper preparation helps prevent
deterioration a ...
Taking Care of the Unexpected
This section covers the more
common problems that motorists
experience with their vehicles. It
gives you information about how to
safely evaluate the problem and what
to do to correct it. If ...
See also:
Carrier Bearing Replacement
Special Tools Required
Attachment, 40 x 50 mm 07LAD-PW50601
NOTE:
-The bearing and the bearing outer race should be
replaced as a set.
-Inspect and adjust the carrier bearing
preload
wheneve ...
Accessory Power Socket Trim
Removal/Installation
Special Tools Required
KTC Trim Tool Set SOJATP2014*
*Available through the Honda Tool and
Equipment
Program; call 888-424-6857
NOTE:
- Take care not to scratch the console.
- Use the approp ...
Clutch Clearance Inspection
Special Tools Required
Clutch Compressor Attachment 07ZAE-PRP0100
1. Inspect the clutch piston, the clutch discs, the clutch
plates, and the clutch end-plate for wear and damage
(see page 14-303), ...