Honda Accord: In-car Temperature Sensor
Replacement
1. Remove the driver's inner dashboard trim (see page 20-167).
2. Disconnect the connector (A), and remove the in-car temperature sensor (B) from the air hose (C).
3. Install the sensor in the reverse order of removal. Be sure to connect the air hose securely
In-car Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs
(see page 21-101).
1. Remove the in-car temperature sensor (see page
21-184).
2. Test the in-car temperature sensor while holding it in
fr ...
Outside Air Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs
(see page 21-101):.
1. Remove the outside air temperature sensor (seepage'
21-185).
2. Dip the sensor in ice water, and measure the
resist ...
See also:
Crankshaft and Piston Remowal
1 Remove the engine/transmission (see page 5-3).
2. Remove the transmission:
- Manual transmission (see page 13-7)
m Automatic transmission (see page 14-194)
3. M/T model: Remove the flywheel (s ...
Oil Pressure Test
NOTE: If the low oil pressure warning indicator stays on
with the engine running, check the engine oil level. If the
oil level is correct, do the following test.
1. With the engine stopped, remov ...
Wear Indicators
The groove where the wear indicator is
located is 1/16 inch (1.6 mm) shallower than
elsewhere on the tire. If the tread has worn so
that the indicator is exposed, replace the tire.
Worn out ...