Honda Accord: Ignition Key Switch Test
1. Remove the steering column upper and lower covers (see page 20-181).
2. Disconnect the 6P connector (A).
3. Check for continuity between terminals No. 1 and No.
2.
• There should be continuity with the key in the ignition switch.
• There should be no continuity with the key removed.
4. If the continuity is not as specified, the ignition key switch is faulty; replace the steering lock assembly (see page 17-16).
Control Unit Input Test
NOTE: Before testing, troubleshoot the multiplex integrated control unit
first, using B-CAN System Diagnosis Test Mode
A (see page 22-134),
Driver's MICU
1. Turn the ignition switch to LOCK (0), ...
Ignition Key Light Test
1. Remove the steering column upper and lower covers
(see page 20-181).
2. Disconnect the 6P connector (A).
3. The LED should come on when power is connected to
terminal No. 6 and ground is co ...
See also:
Seat
Driver's seat
- 4-door
2-door
Front passenger's seat
4-cfoor
2-door
...
Exterior Care
Dust off the vehicle body after you drive.
Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a
painted surface can result in body rust. If you find a scratch, promptly ...
Using HFL
• HFL Buttons
(Pick-up) button: Press
to go to the Phone Call screen or to answer an
incoming call.
(Hang-up/back) button:
Press to end a call or to cancel a command.
(Talk) button: Pr ...