Honda Accord: If the Brake System Indicator (Red)Comes On - Indicator, Coming On/Blinking - Handling the Unexpected - Honda Accord 2013-2025 Owner's ManualHonda Accord: If the Brake System Indicator (Red)Comes On

• Reasons for the indicator to come on

• Reasons for the indicator to come on

• The brake fluid is low.
• There is a malfunction in the brake system.

• What to do when the indicator comes on while driving

Press the brake pedal lightly to check pedal pressure.

• If normal, check the brake fluid level the next time you stop.
• If abnormal, take immediate action. If necessary, downshift the transmission to slow the vehicle using engine braking.

Have your vehicle repaired immediately.

It is dangerous to drive with low brake fluid. If there is no resistance from the brake pedal, stop immediately in a safe place. If necessary downshift the gears.

If the brake system indicator and ABS indicator come on simultaneously, the electronic brake distribution system is not working. This can result in vehicle instability under sudden braking.

Have your vehicle inspected by a dealer immediately.

    If the Malfunction Indicator LampComes On or Blinks
    • Reasons for the indicator lamp to come on or blink • Comes on when there is a problem with the engine emissions control system, or the fuel fill cap is missing, or loose. • Blinks when ...

    If the EPS System Indicator Comes On
    • Reasons for the indicator to come on • Comes on when there is a problem with the EPS system. • If you depress the accelerator pedal repeatedly to increase the engine speed while the eng ...

    See also:

    Brake Hose Replacement
    NOTE; - Before reassembling, cheek that all parts are free of dirt and other foreign particles. - Replace parts with new ones whenever specified to do so. - Do not spill brake fluid on the ve ...

    Body Specifications
    4-door Model: ...

    Power Mirror Actuator Test
    1. Remove the mirror mount cover (see page 20-62). 2. Disconnect the 8P connector (A) from the power mirror actuator (B). 3. Check the actuator operation by connecting battery power and ground ...