Honda Accord: Hood insulator Replacement - Hood - Body - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Hood insulator Replacement

For Some Models

NOTE; Take care not to scratch the hood.

1. Detach the clips with a clip remover. Remove the hood insulator (A) by pulling it away from the hooks  (B).

2. Install the insulator in the reverse order of removal,


2. Install the insulator in the reverse order of removal, and note these items: - If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.

    Hood Seal and Hood Molding Replacement
    NOTE: Take care not to scratch the hood. 1. Detach the clips (A) with a clip remover, then remove the hood seal (B). On Canada models: Detach the clips (C), then remove the hood molding (D). 2-d ...

    Trunk Lid
    ...

    See also:

    Interior Rearview Mirror
    Adjust the angle of the rearview mirror when you are sitting in the correct driving position. • Rearview Mirror with Day and Night Positions* Flip the tab to switch the position. The nigh ...

    Warranty Coverages
    U.S. Owners Your new vehicle is covered by these warranties: New Vehicle Limited Warranty - covers your new vehicle, except for the emissions control systems and accessories, against defects ...

    Rear Seat Cushion Cover Replacement
    NOTE: -Put on gloves to protect your hands. - Take care not to tear or damage the seat covers. 1. Remove the seat cushion (see page 20-241). 2. From the back of the seat-back, release all th ...