Rear Bumper Finisher Cover Replacement

2-door NOTE: - Put on gloves to prevent damage. - Take care not to scratch the rear bumper or the body. - When prying with a flat-tip screwdriver, wrap it with protective tape to prevent dama ...

Hood Adjustment

1. Remove these Items: - Front grille cover: - 2-door (see page 20-274) - 4-door (see page 20-274) - Cowl covers (see page 20-278) - Hood latch cover, 4-door (see step 2 on page 20-302) 2. Sligh ...

See also:

Brake Pedal Replacement
1. Disconnect the brake pedal position switch connector ( A ) . 2. Remove the lock pin (B) and the clevis pin (C). 3. Remove the brake pedal support member (D). 4. Remove the brake pedal bra ...

Clutch Interlock Switch Replacement
M/T model 1, Disconnect the clutch interlock switch connector (A). 2. Loosen the locknut (B), then remove the clutch interlock switch (C). 3. Install the clutch interlock switch, and adjust th ...

Trunk Lid Torsion Bar Replacement
Special Tools Required Torsion Bar Assembly Tool 07AAF-SNAA100 1. Remove the trunk lid torsion bars (A) from the torsion bar center clip (B). 3. Remove the torsion bar center clip (A) from the ...