Honda Accord 2008-2012 Owner's Manual
Eighth generation (2008–2012) / Honda Accord 2008-2012 Owner's Manual
- Introduction
- A FewWordsAbout Safety
- Overview of Contents
- Your Vehicle at a Glance
- Driver and Passenger Safety
- Instruments and Controls
- Features
- Before Driving
- Driving
- Maintenance
- Taking Care of the Unexpected
- Technical Information
- Warranty and Customer Relations
Customer Service Information
Honda dealership personnel are trained professionals.
They should be able to answer all your questions. If you encounter a problem
that
your dealership does not solve to your satisfaction, please ...
Introduction
One of the best ways to enhance the enjoyment of your new vehicle is to
read this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this own ...
See also:
Ball Joint Boot Inspection / Replacemen
Special Tools Required
- Clip Guide, 45 mm 070AG-SJA0300
-Clip Guide, 41 mm 07974-SA50700
1. Check the ball joint boot for weakness, damage,
cracks, and grease leaks.
NOTE:
- If the ball joint ...
Cylinder Head Cover Installation
1. Thoroughly clean the head cover gasket and the
groove.
2. Install the head cover gasket (A) in the groove of the
cylinder head cover (B).
3. Check that the mating surfaces are clean and dry ...
DTC Troubleshooting
DTC B1280: Turn Signal Switch Circuit
Malfunction
NOTE: If you are troubleshooting multiple DTCs, be sure
to follow the instructions in B-CAN System Diagnosis
Test Mode A (see page 22-134).
1. ...