Honda Accord: Heating, Ventilation, and Air Conditioning
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Heating, Ventilation, and Air Conditioning
Frame Repair Chart
Top View
g2 Front floor locating hole 025 (0.98) rear
h2 Front floor tunnel frame locating hole 013 (0.51) rear
i Rear frame A locating hole 025 (0.98)
j Rear floor locating hole 025 (0.98)
k1 ...
See also:
System Description
The vehicle is equipped with a Type Vll (GEN 5) immobilizer system that will
disable the vehicle unless a programmed
ignition key is used.
This system consists of a transponder combined with a k ...
Transmission End Cover
End Cover Installation
Exploded View
Special Tools Required
Mainshaft Holder 07GAB-PF50101
NOTE: Refer to the Exploded View as needed during the
following procedure.
1. Install the mainshaft ...
Drive Belt Auto-tensioner
Inspection
Special Tools Required
Belt Tension Release Tool Snap-on YA9317 or
equivalent, commercially available
1. Turn the ignition switch to ON (II), and make sure to
turn the A/C switch OFF. Turn the ign ...