Honda Accord: Heating and Cooling - Controls - Honda Accord 2013-2026 Owner's ManualHonda Accord: Heating and Cooling

Using Vents, Heating and A/C

• Heating

• Heating

The heater uses engine coolant to warm the

The heater uses engine coolant to warm the air.

1. Adjust the fan speed using the fan control dial.
2. Select 3. Adjust the temperature using the.
3. Adjust the temperature using the temperature control dial.

• To rapidly warm up the interior

1. Set the fan to the maximum speed.
2. Select 3. Set the temperature to maximum warm..
3. Set the temperature to maximum warm.
4. Press the on). button (the indicator on).

• To dehumidify the interior

When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up.

1. Turn the fan on.
2. Press the A/C button to turn on the air conditioning.

When you select automatically, the mode automatically switches to fresh air.

Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode.

• Cooling

1. Adjust the fan speed using the fan control

1. Adjust the fan speed using the fan control dial.
2. Select 3. Adjust the temperature using the.
3. Adjust the temperature using the temperature control dial.
4. Press the A/C button (the indicator on).

• To rapidly cool down the interior

1. Set the fan to the maximum speed.

2. Set the temperature to maximum cool.

3. Press theon). button (the indicator on).

If the interior is very warm, you can cool it down more rapidly by partially opening the windows.

While in the ECON mode, the system has greater temperature fluctuations.

Pressing the ECON mode button bypasses the ECON mode control, and cools down the interior more rapidly.

• Defrosting the Windshield and Windows

Pressing the  button turns the

Pressing the air button turns the air conditioning system on and automatically switches the system to fresh air mode.

For your safety, make sure you have a clear view through all the windows before driving.

Do not set the temperature near the upper or lower limit.

When cold air hits the windshield, the outside of the windshield may fog up.

If the side windows fog up, adjust the vents so that the air hits the side windows.

• To rapidly defrost the windows

1. Set the fan to the maximum speed.
2. Press the 3. Press the  button.button.
3. Press the 4. Set the temperature to maximum warm. button.
4. Set the temperature to maximum warm.

After defrosting the windows, switch over to fresh air mode.

If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.

    Interior Lights/Interior ConvenienceItems
    • Interior Light Switches • ON The interior lights come on regardless of whether the doors are open or closed. • Door activated The interior lights come on in the following situations: ...

    Climate Control System*
    ...

    See also:

    Front Brake Caliper Overhaul
    Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health. - Avoid breathing dust particles. - Never use an air hose or brush to clean brake ...

    ATF Replacement
    NOTE: Keep all foreign particles out of the transmission. 1. Park the vehicle on level ground. 2. Warm up the engine to normal operating temperature (the radiator fan comes on), and turn the en ...

    General Troubleshooting Information
    Mow to Check for DTCs with the HDS NOTE: Check the vehicle battery condition first {see page 22-90). 1. Make sure the ignition switch is turned to LOCK (0). 2. Connect the HDS to the data link ...