Honda Accord: Glove Box Light Replacement
"08-09 models
1. Remove the glove box stops and damper (see page 20-174).
2. Turn the bulb socket (A) 45 В° counterclockwise to remove it.
Glove Box Light: 2 CP
3. Remove the bulb (B) from the socket.
4. Install the light in the reverse order of removal.
Courtesy Light Replacement
1 Carefully pry off the lens (A) with a small screwdriver.
Courtesy Light: 2 CP
2. Remove the bulb (B) from the socket.
3. Install the light in the reverse order of removal. ...
Vanity Mirror Light Test/Replacement
1 . Remove the sunvisor (see page 20-135).
2. Disconnect the 2P connector (A) from the sunvisor (B).
Vanity Mirror Light: 1.1 W x 2
3. Check for continuity between terminals No. 1 and No.
2. ...
See also:
Control Locations
Control Locations ...
Instruments and Controls
This section gives information about
the controls and displays that
contribute to the daily operation of
your vehicle. All the essential
controls are within easy reach. ...
Rear Power Window Motor Test
1. Remove the rear power window switch (see page
22-307).
2. Test the motor in each direction by connecting battery
power and ground to the rear power window switch
14P connector (A) according t ...