Honda Accord: General Troubleshooting
Information
Lever-Locked Connector
Disconnecting
To disconnect the connector, pull the lever (A) while pushing the lock tab (B) down, then pull the connector (C).
Connecting
To connect the connector, push the connector into the connector sleeve (A). As the connector is pressed in, the lever (B) moves to the locked position.
See also:
Tire Pressure Sensor Location
Special Tools Required
TPMS Trigger Tool ATEQ VT55*
*Available through the Honda Tool and
Equipment
Program 888-424-6857
NOTE:
- The TPMS tool is necessary to do this procedure.
- Let the ve ...
Accessories and Modifications
Modifying your vehicle, or installing
some non-Honda accessories, can
make your vehicle unsafe. Before
you make any modifications or add
any accessories, be sure to read the
following inform ...
Idle Speed Inspection
NOTE:
- Before checking the idle speed, check these items:
- The malfunction indicator lamp (MIL) has not been
reported on, and there are no DTCs.
- Ignition timing
- Spark plug ...