Honda Accord: Gearshift Mechanism Replacement
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.
Transmission Reassembly
NOTE: Prior to reassembly, clean all the parts in solvent,
dry them, and apply MTF to any contact surfaces.
1. Install the magnet (A) and the differential assembly
(B).
NOTE: Clean the magnet ...
Shift Lever Housing Replacement
NOTE:
- Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
- Take care not to scratch the center console,
dashboard, and related parts.
1. Remove th ...
See also:
Door Striker Adjustment
Make sure the door latches securely without slamming
it. If necessary, adjust the striker (A): The striker nuts are
fixed, but the striker can be adjusted slightly up or down,
and in or out.
1. ...
If the Engine Overheats
The pointer of your vehicle’s
temperature gauge should stay in
the midrange under most conditions.
If it climbs to the red mark, you
should determine the reason (hot
day, driving up a steep ...
Air Mix Control Motor Replacement
1. Remove the driver's dashboard undercover (see page
20-170).
2. Disconnect the 7P connector (A) from the air mix
control motor (B). Remove the self-tapping screws
and the air mix control motor ...