Honda Accord: Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators.
They are displayed when the ignition switch is in ON

• Speedometer
Displays your driving speed in mph (U.S.) or km/h (Canada).
• Tachometer
Shows the number of engine revolutions per minute.
• Fuel Gauge
Displays the amount of fuel left in the fuel tank.
NOTICE
You should refuel when the reading approaches
.
Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
The actual amount of remaining fuel may differ from the fuel gauge reading.
• Temperature Gauge
Displays the temperature of the engine coolant.
NOTICE
Driving with the temperature gauge pointer in the upper zone can cause serious engine damage. Pull safely to the side of the road and allow engine temperature to return to normal.
Information Display
The information display shows the odometer, trip meter, engine oil life and
maintenance service item codes, and other gauges.
• Switching the Display
Press the (Select/Reset) knob to
change th ...
See also:
A/C Pressure Switch Circuit
Troubleshooting
NOTE:
• if the blower motor does not run at all speeds, the A/C
compressor will be inoperative. Run the
self-diagnostic function, and check for DTC B1241.
Before performing any other troubl ...
DTC Troubleshooting
DTC P062F: Powertrain Control Module (PCM)
Internal Control Module Keep Alive Memory
(KAM) Error
NOTE: Before you troubleshoot record all freeze data
and any on-board snapshot with the HDS, and re ...
Introduction
One of the best ways to enhance the enjoyment of your new vehicle is to
read this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this own ...
