Honda Accord: Fuel Economy - Driving - Honda Accord 2013-2024 Owner's ManualHonda Accord: Fuel Economy

Improving Fuel Economy

Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle.

Direct calculation is the recommended method to determine actual fuel consumed while driving.

In Canada, posted fuel economy numbers are

In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit http://oee.nrcan.gc.ca/

• Maintenance and Fuel Economy

You can optimize your fuel economy with proper maintenance of your vehicle.

Always maintain your vehicle in accordance with the messages displayed on the information display*/multi-information display*.

• Use the recommended viscosity engine oil, displaying the API Certification Seal.
• Maintain the specified tire pressure.
• Do not load the vehicle with excess cargo.
• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside adds weight and increases wind resistance.

    How to Refuel
    1. Stop your vehicle with the service station pump on the left side of the vehicle in the rear. 2. Turn off the engine. 3. Push on the fuel fill door release handle at the foot of the driv ...

    Accessories and Modifications
    ...

    See also:

    Transmission Number
    Transmission Type 88E5: 5-speed Manual M91 A: 5-speed Automatic B90A: 5-speed Automatic Serial Number 1000001-: M91A, B90A 8000001-: 88E5 ...

    Control Unit Input Test
    NOTE: Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A (see page 22-134), and make sure the lighting system works properly. Driver ...

    Selector Control Shaft Oil Seal Replacement
    Special Tools Required -Driver Handle, 15 x 135L 07749-0010000 •Attachment 22 x 24 mm 07746-001A800 1. Remove the oil seal (A) from the end cover (B). 2. Install a new oil seal flush to the ...