Honda Accord: Front Passenger's Power Window
Switch Replacement - Power Windows - Body Electrical - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Front Passenger's Power Window Switch Replacement

4-door

1. Carefully remove the front passenger's power window switch (A).

2. Disconnect the 37P connector (B) from the front


2. Disconnect the 37P connector (B) from the front passenger's power window switch.

3. Remove the four screws and the front passenger's power window switch (A).

4. Install the switch in the reverse order of removal.


4. Install the switch in the reverse order of removal.

5. With AUTO UP/AUTO DOWN function; Reset the power window control unit (see page 22-280).

1. Remove the passenger's door panel (see page 20-12).


1. Remove the passenger's door panel (see page 20-12).

2. Disconnect the 37P connector (A) from the passenger's power window switch (B).

3. Remove the switch panel and armrest from the door


3. Remove the switch panel and armrest from the door panel (see page 20-12).

4. Remove the four screws and the passenger's power window switch (A).

5. Install the switch in the reverse order of removal.


5. Install the switch in the reverse order of removal.

6. With AUTO UP/AUTO DOWN function: Reset the power window control unit (see page 22-280).

    Power Window Master Switch Replacement
    4-door 1. Carefully remove the power window master switch (A). 2. Disconnect the 37P connector (B) from the power window master switch, and the 13P connector (C) from the power mirror switch (D ...

    Rear Power Window Switch Test/Replacement
    1. Carefully remove the rear power window switch (A). 2. Disconnect the 14P connector (B) from the rear power window switch. 3. Remove the three screws and the rear power window switch (A). ...

    See also:

    Component Location Index
    2-door 4-door ...

    Dust and Pollen Filter Replacement
    1. Open the glove box. Remove the glove box stop on the right side, then let the glove box hang down (see page 20-174). 2. Remove the dust and pollen filter assembly (A) from the blower unit. ...

    Shift Solenoid Valve Test, Replacement, and Shift Solenoid Wire Harness Replacement
    1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not go to the ...