Honda Accord: Front Fender Fairing Replacement
For Some Models
NOTE; - Take care not to scratch the body.
- Put on gloves to protect your hands.
1. Remove the front Inner fender as needed (see page 20-290).
2. From the wheel arch, release the clips fastening the front fender fairing (A).
3. Open the front door. Release the hooks (A) fastening the front fender fairing (B).
4. Remove the front fender fairing (A).
5. Install the fender fairing in the reverse order of removal, and note these items: - If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely
Front Splash Shield Replacement
NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to
prevent damage.
- 4-door is sho ...
Middle Floor Undercover
Replacement
Left Side
NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the body.
1. Remove the bolts and release the hook (A), then
remove the left middle floor undercover (B).
...
See also:
Park Lever Stop Inspection and
Adjustment
1. Set the park lever in the P position.
2. Measure the distance (A) between the park pawl shaft
(B) and the park lever roller pin (C).
Standard: 57.7-58.7 mm (2.27-2.31 in)
3. If the measurem ...
In-car Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs
(see page 21-101).
1. Remove the in-car temperature sensor (see page
21-184).
2. Test the in-car temperature sensor while holding it in
fr ...
Danger/Warning/Caution Label Locations (cont'd)
2-door Model
4-door SV9odel:
2-door Model:
...