Honda Accord: Front Bumper Fog Light Cover
Replacement
2-door
NOTE; Take care not to scratch the front bumper.
1. Remove the front bumper (see page 20-255).
2. Remove the screws (A, B), then remove the front bumper fog light cover (C) from the front bumper (D).
3. Install the bumper fog light cover in the reverse order of removal.
Front Bumper Removal/Installation
NOTE:
- Have an assistant help you when removing and
installing the front bumper.
- Take care not to scratch the front bumper
or the body.
- Put on gloves to protect your hands.
- When pr ...
Front Air Spoiler Replacement
NOTE:
-Take care not to scratch the front bumper,
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver,
wrap it with
protective tape to prevent damage.
1. Remove ...
See also:
Adding Engine Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten
it securely.
4. Wait for three minutes and recheck the
engine oil dipsti ...
Charging System Indicator
Charging System
Indicator
If the charging system indicator
comes on brightly when the engine
is running, the battery is not being
charged.
Immediately turn off all electrical
accessories ...
A/T Clutch Pressure Control Solenoid
Valve A Replacement
1. Remove the intake air duct
2. Disconnect the A/T clutch pressure control solenoid
valve A connector.
3. Remove the bolts securing the ATF cooler line
brackets (B), then remove A/T clutch pres ...