Honda Accord: Frame Repair Chart

Top View

g2 Front floor locating hole 025 (0.98) rear

h2 Front floor tunnel frame locating hole 013 (0.51) rear

i Rear frame A locating hole 025 (0.98)

j Rear floor locating hole 025 (0.98)

k1 For rear subframe mount 028.2 (1.03) front

k2 For rear subframe mount 026.2 (1 .В©3) rear

I Rear damper center hole 052 (2.05

Side View

Unit: mm (in)

0: Inner diameter

al For front subframe mount 02В© (0.79) front

a2 For front subframe mount 018 (0.S3) rear

bl Front side frame locating hole 025 (0.98) front

b2 Front side frame locating hole 015 (0.59) rear

b3 Front side frame rear end locating hole 025 (0.98)

cl For engine side mount 013 (0.51) front

c2 For engine side mount 013 (0.51) middle

c3 For engine side mount 013 (0.51) rear

dl For transmission mount 011 (0.43) front

d2 For transmission mount 011 (0.43) middle

d3 For transmission mount 011 (0.43) rear

el For upper arm mount 011 (0.43) front

e2 For upper arm mount 011 (0.43) rear

f 1 Front damper center hole 050 (1.97)

f2 For front damper mount 011.5 (0.45) front

f3 For front damper mount 011.5 (0.45) center side

f4 For front damper mount 011.5 (0.45) rear

g1 Front floor locating hole 025 (0.98) front

hi Front floor tunnel frame locating hole 013 (0.51) front

g2 Front floor locating hole 025 (0.98) rear

h2 Front floor tunnel frame locating hole 013 (0.51) rear

I Rear frame A locating hole 025 (0.98)

j Rear floor locating hole 025 (0.98)

kl For rear subframe mount 026.2 (1.03) front

k2 For rear subframe mount 026.2 (1.03) rear

I Rear damper center hole 052 (2.05)

ml Rear floor cross-member locating hole 015 (0.59) right side

m2 Rear floor cross-member locating hole 015 (0.59) left side

n Rear frame B locating hole 025 (0.98)

o Spare tire pan locating hole 025 (0.98)

SUPPLEMENTAL RESTRAINT SYSTEM (SRS) (If HVAC maintenance is required)

The Accord SRS Includes a driver's airbag In the steering wheel hub, a passenger's airbag In the dashboard above the glove box, seat belt tensioners In the front seat belt retractors, side curtain airbags In the sides of the roof, and side airbags in the front seat-backs. Information necessary to safely service the SRS is included in this Service Manual. Items marked with an asterisk (*) on the contents page include or are located near SRS components. Servicing, disassembling, or replacing these items requires special precautions and tools, and should be done by an authorized Honda dealer.

- To avoid rendering the SRS inoperative, which could lead to personal injury or death in the event of a severe frontal or side collision, all SRS service work should be done by an authorized Honda dealer.

- Improper service procedures, including incorrect removal and installation of the SRS, could lead to personal injury caused by unintentional deployment of the airbags, side airbags, and/or side curtain airbags.

- Do not bump or impact the SRS unit, front impact sensors, side impact sensors, or rear safing sensor, especially when the ignition switch is in ON (II), or for at least 3 minutes after the ignition switch is turned to LOCK (0); otherwise, the system may fail in a collision, or the airbags may deploy.

- SRS electrical connectors are identified by yellow color coding. Related components are located in the steering column, center console, dashboard, dashboard lower cover, in the dashboard above the glove box, in the front seats, in the roof side, and around the floor. Do not use electrical test equipment on these circuits.