Pump Pressure Test w i th T/N 07406-001000A or T/N 07406-001A101

Special Tools Required -Pump Joint Adapter 07RAK-S040111 o r P/S Joint Adapter (pump) 07RAK-S040110 •Hose Joint Adapter 07RAK-S040122 •P/S Pressure Gauge 07408-001000A or 07406-001A1 ...

Fluid Replacement

Check the reservoir (A) at regular intervals, and add the recommended fluid as necessary. Always use Honda Power Steering Fluid. Using any other type of power steering fluid or automatic transmissi ...

See also:

Driver's Seat Position Sensor Operation Check
Check the driver's seat position sensor after driver's seat position sensor replacement. 1. Make sure the driver's seat is all the way forward position. 2. Make sure the ignition switch is in L ...

Shift Solenoid Valve Test, Replacement, and Shift Solenoid Wire Harness Replacement
1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not go to the ...

B-CAN System Diagnosis Test Mode B
Do this diagnosis if any of the control units are not communicating (Not Available is displayed in the HDS) as found by the B-CAN System Diagnosis Test Mode A (see page 22-134). 1. Using the HDS ...