Controls

Driving

See also:

Outboard Joint Side
1. Wrap the splines on the driveshaft with vinyl tape (A) to prevent damaging the outboard boot. 2. Install new ear clamp bands (B) and the outboard boot onto the driveshaft, then remove the viny ...

Valve Stem-to-Guide Clearance Inspection
1. Remove the valves (see page 6-86). 2. Subtract the O.D. of the valve stem, measured with a micrometer, from the I.D. of the valve guide, measured with an inside micrometer or a ball gauge. ...

Fasten and Position the Seat Belts
Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries ...