Automatic Climate Control Sensors

The automatic climate control system is equipped with a sunlight sensor and an interior temperature sensor. Do not cover or spill any liquid on them. ...

Audio System

...

See also:

Change Lever Clearance Inspection
1. Measure the clearance between the change lever (A) and the select lever (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2. Standard: 0.05-”0.25 mm (0.002 ...

Battery Removal and Installation
NOTE: The battery terminal disconnection and reconnection procedure (see page 22-91) must be done before and after doing this procedure- Some systems store data in memory that is lost when the batt ...

Oil Filter Base Replacement
1. Remove the oil filter (see page 8-12). 2. Remove the exhaust pipe bracket (A), then remove the oil filter base (B). 3. Clean the O-ring grooves and the mating surface with the oil filter ba ...