Honda Accord: Engine Mount Replacement
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Engine Mechanical / Engine Assembly / Engine Mount Replacement

Engine Installation
Special Tools Required
- Universal Lifting Eyelet 07AAK-SNAA120
Engine Hanger Adapter VSB02C000015
Engine Support Hanger, A and Reds AAR-T-1256*
Subframe Adapter VSB02C000016
Subframe Alignment P ...
See also:
Heating and Cooling
Using Vents, Heating and A/C
• Heating
The heater uses engine coolant to warm the
air.
1. Adjust the fan speed using the fan control
dial.
2. Select .
3. Adjust the temperature using ...
Throttle Body Removal/Installation
Do not insert your fingers into the installed throttle body when you turn
the ignition switch to ON (II) or while the
ignition switch is in ON (II). If you do, you will seriously injure your finger ...
Wheel Runout Inspection
1. Raise and support the vehicle (see page 1 -13).
2. Check for a bent or deformed wheel.
3. Set up the dial gauge as shown, and measure the
axial runout by turning the wheel.
Front and rear w ...
