Honda Accord: Dual Temperature Control
Your vehicle has two temperature control switches, one for the driver, and one for the front passenger.
The temperatures of the driver’s side and the front passenger’s side are controlled independently.
Dual Temperature Control
Synchronized Control
The selected temperatures appear in the display (in the center display on models with navigation system).
When the indicator in the SYNC button is on, you can adjust both sides to the same temperature by pushing the driver’s side temperature control switch up or down.
When you set the temperature to its
upper or lower limit, it is displayed as
or
.
Synchronized Control
Semi-automatic Operation
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled. Making any
manual selection ca ...
Sunlight Sensor/Temperature Sensor
The climate control systemhas two
sensors: a sunlight sensor on top of
the dashboard, and a temperature
sensor next to the steering column.
Do not cover the sensors or spill any
liquid on t ...
See also:
Ignition Key Switch Test
1. Remove the steering column upper and lower covers
(see page 20-181).
2. Disconnect the 6P connector (A).
3. Check for continuity between terminals No. 1 and No.
2.
• There should ...
Door Key Cylinder Switch Test
1. Remove the driver's door panel (see page 20-17).
2. Disconnect the 10P connector (A) from the door lock
actuator (key cylinder switch) (B).
3. Check for continuity between the terminals.
...
Piston Ring Replacement
1. Remove the piston from the engine block (see page
7-14).
2. Using a ring expander (A), remove the old piston
rings (B).
3. Clean all ring grooves thoroughly with a squared-off
broken ring ...