Honda Accord: Driving Safely with a Trailer - Towing a Trailer - Driving - Honda Accord 2013-2025 Owner's ManualHonda Accord: Driving Safely with a Trailer

• Things You Need To Know Before Towing a Trailer

• Have the trailer properly serviced and keep it in good condition.
• Make sure that all the weights and load in the vehicle and trailer are within limits.
• Securely attach the hitch, safety chains, and other necessary parts to the trailer.
• Securely store all the items in and on the trailer so that they do not shift while driving.
• Check if the lights and brakes on the trailer are working properly.
• Check the pressures of the trailer tires, including the spare.

Parking

In addition to the normal precautions, place wheel chocks at each of the trailer's tires.

• Towing Speeds and Gears

• Drive slower than normal.
• Obey posted speed limits for vehicles with trailers.

• Use the position when towing a trailer on level roads.

• Use the • Turning and Brakingposition when towing a trailer on level roads.

• Turning and Braking

• Turn more slowly and with a wider turning arc than normal.
• Allow more time and distance for braking.
• Do not brake or turn suddenly.

• Driving in Hilly Terrain

• Monitor your temperature gauge. If it nears the red (Hot) mark, turn off the heating and cooling system*/climate control system* and reduce speed. Pull to the side of the road safely to cool down the engine if necessary.

• Shift to the  position if the

• Shift to the transmission shifts frequently. position if the transmission shifts frequently.

    Towing Preparation
    • Towing Load Limits Your vehicle can tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the towing guidelines. Check the load limits before driving. ...

    Towing Your Vehicle
    Your vehicle is not designed to be towed behind a motor home. If your vehicle needs to be towed in an emergency, refer to the emergency towing information. ...

    See also:

    Alternator FR Signal Circuit Troubleshooting
    1. Start the engine, and let it idle. 2. Monitor the ALTERNATOR in the DATA LIST with the HDS. 3. Check if the indicated percentage varies when the headlight switch is turned on. Does the p ...

    Rear License Plate Light Bulbs
    The license plate has two lights above it. The bulbs should be replaced by your dealer. ...

    Valve Body Valve Installation
    1. Coat all parts with ATF before assembly. 2. Install the valves and the springs in the sequence shown for the main valve body (see page 14-277), the regulator valve body (see page 14-279), and ...