Honda Accord: Driver's Inner Dashboard Trim Removal/Installation
Special Tools Required
KTC Trim Tool Set SOJATP2014*
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE: - Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the driver's inner dashboard trim (A).
-1. Pry up on the edge of the trim at the steering column side with the appropriate trim tool.
-2. Detach the clips.
-3. Release the hook (B) from under the center panel (C).
2. Install the trim in the reverse order of removal, and note these items: - If the clips are damaged or stress-whitened, replace them with new ones.
- First insert the hook under the center panel, then push the clips into place securely.
Driver's Outer Dashboard Trim Removal/Installation
Special Tools Required KTC Trim Tool Set SOJATP2014* *Available through the Honda Tool and Equipment Program; call 888-424-6857 NOTE: - Take care not to scratch the dashboard or the related pa ...Center Pocket Removal/Installation
Without Navigation System NOTE; - Take care not to scratch the dashboard or the related parts. - A/T is shown; M/T is similar. 1. Remove the center console panel (see page 20-157). 2. A/T: ...See also:
Side Turn Signal/Emergency Indicator Light Bulbs*
Door mirrors have the side turn lights. Have an authorized Honda dealer
inspect and
replace the light bulbs.
...
CMP Sensor A Replacement
1. Disconnect the CMP sensor A 3P connector (B).
2. Remove CMP sensor A from the intake camshaft side
of the cylinder head.
3. Install the parts in the reverse order of removal with a
new O-ri ...
Warranty Coverages
U.S. Owners
Your new vehicle is covered by these
warranties:
New Vehicle Limited Warranty - covers your new vehicle, except
for
the emissions control systems and
accessories, against defects ...