Honda Accord: Cylinder Head -All Models Except PZEV
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Engine Mechanical / Cylinder Head -All Models Except PZEV
- Special Tools
- Cylinder Head
- VTEC Rocker Arm Test
- VTC Actuator Inspection
- Valve Clearance Adjustment
- Crankshaft Pulley Removal and Installation
- Cam Chain Removal
- Cam Chain Installation
- Cam Chain Auto-tensioner Removal and installation
- Cam Chain Case Oil Seal Installatio
- Cam Chain Inspection
- Cf Under Head Cover Mmmmm
- Cylinder Head Cover Installation
- Cf Under Head Removal
- CMP Pulse Plate A Replacement
- CMP Pulse Plate B Replacement
- VTC Actuator, Exhaust Camshaft Sprocket Replacement
- Cylinder Head Inspection for Warpage
- Rocker Arm Assembly Removal
- Rocker Arm and Shaft Disassembly/Reassembly
- Rocker Arm and Shaft inspection
- Camshaft Inspection
- Valve, Spring, and Valve Seal Removal
- Valve Stem-to-Guide Clearance Inspection
- Waive Guide Replacement
- Valve Seat Reconditioning
- Valve, Spring, and Valve Seal Installation
- Rocker Arm Assemblf Installation
- Cylinder Head Installation
- Sealing Bolt Installation
Special Tools
Component Location Index
...
See also:
In-car Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs
(see page 21-101).
1. Remove the in-car temperature sensor (see page
21-184).
2. Test the in-car temperature sensor while holding it in
fr ...
Load Limits
The maximum load for your vehicle
is 850 lbs (385 kg).
See Tire And Loading Information
label attached to the driver’s
doorjamb.
Label Example
This figure includes the total weight
of a ...
Glass Replacement
1. Close the glass fully.
2. Slide the sunshade all the way back.
3. Pry out the lid (A), remove the screw (B), and release
the hooks (C), then remove the bracket cover (D).
Repeat on the op ...