Honda Accord: Courtesy Light Replacement
1 Carefully pry off the lens (A) with a small screwdriver.
Courtesy Light: 2 CP
2. Remove the bulb (B) from the socket.
3. Install the light in the reverse order of removal.
Ambient Light Replacement
With moonroof
NOTE: The ambient light is built into the moonroof
switch.
1. Remove the front individual map lights (see page
22-258).
2. Disconnect the moonroof switch 12P connector (A)
and ...
Glove Box Light Replacement
"08-09 models
1. Remove the glove box stops and damper (see page
20-174).
2. Turn the bulb socket (A) 45 В° counterclockwise to
remove it.
Glove Box Light: 2 CP
3. Remove the bulb (B) ...
See also:
Changing a Flat Tire
If you have a flat tire while driving,
pull over safely. Drive slowly along
the shoulder until you get to an area
far away from traffic lanes.
The vehicle can easily roll off
the jack, se ...
Secondary Shaft Bearing
Replacement
Special Tools Required
•Driver Handle, 15 x 135L 07749-0010000
•Attachment, 62 x 68 mm 07746-0010500
1. Remove the set plate bolt, then remove the lock
washer (A) and the bearing set pla ...
Engine Oil Life Display
To see the current engine oil life,
turn the ignition switch to the ON
(II) position, then press and release
the select/reset knob repeatedly
until the engine oil life indicator
appears.
...