PCV System

...

PCV Valve Inspection

1. Check the PCV valve (A), hoses (B), and connections for leaks or restrictions. 1.PCV valve when the hose between the PCV valve and intake manifold is lightly pinched (A) with your fingers or ...

See also:

Reverse Idler Gear Removal and Installation
Removal 1. Remove the bolt (A) securing the reverse idler gear shaft holder (B). 2. Install a 5 x 0.8 mm bolt (C) in the reverse idler gear shaft (D), and pull it to remove the reverse idler gea ...

Electrical Compass Zone Selection and Calibration
NOTE: • You should do this procedure any time the electrical compass unit is replaced. • You should do this procedure in an open area away from buildings, power lines, and other vehicl ...

Starting the Engine
1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The ST ...