Special Tools

...

Connecting Rod and Crankshaft End Play Inspection

1. Remove the oil pump (see page 8-16). 2. Remove the baffle plate (see step 8 on page 7-14). 3. Measure the connecting rod end play with a feeler gauge between the connecting rod and the cran ...

See also:

Power Mirror Actuator Replacement
Removal 1. Remove the mirror holder (see page 20-63). 2. Remove the power mirror (see page 20-62), and disconnect the power mirror 8P connector from the door wire harness. 3. Remove the gaske ...

Park Lever Stop Inspection and Adjustment
1. Set the park lever in the P position. 2. Measure the distance (A) between the park pawl shaft (B) and the park lever roller pin (C). Standard: 57.7-58.7 mm (2.27-2.31 in) 3. If the measurem ...

Dual Temperature Control
Your vehicle has two temperature control switches, one for the driver, and one for the front passenger. The temperatures of the driver’s side and the front passenger’s side are controlled ...