Honda Accord: Component Location Index

Charging System
...
See also:
A/T Clutch Pressure Control Solenoid
Valve B and C Test
1. Connect the HDS to the DLC (A) located under the
driver's side of the dashboard.
2. Turn the ignition switch to ON (II). Make sure the HDS
communicates with the PCM. If it does not, go to the
...
XM Antenna Replacement
1. Remove the headliner (see page 20-140).
2. Remove the nut (A) from the XM antenna (B).
3. Disconnect the connector (C) and remove the XM
antenna.
4. Install the XM antenna in the reverse ...
Carrier Bearing Preload Inspection
Special Tools Required
•Driver Handle, 15 x 135L 07749-0010000
•Attachment, 72 x 75 mm 07746-0010600
-Preload Inspection Tool 07HAJ-PK40201
NOTE;
-If the transmission housing, the torqu ...
