Keyless/Power Door Locks/Security System

...

System Description

Security Alarm The security alarm system is armed automatically after the doors, hood, and trunk lid are closed and locked. For the system to arm, the ignition switch must be in the LOCK (0) posit ...

See also:

Injector Replacement
1. Relieve the fuel pressure (see page 11-306). 2. Remove the engine cover, 3. Disconnect the quick-connect fitting (A). 4. Disconnect the Injector connectors (B) and the engine mount control s ...

Door Lock Actuator Test
Driver's Door and Left Rear Door (4-door) 1 Remove the door panel. • Front (see page 20-17) • Rear (see page 20-38) 2. Disconnect the 10P connector (A) from the actuator (B). NOTE: T ...

A/T Clutch Pressure Control Solenoid Valve A Test
1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not, go to the ...